Facilities across the globe rely on biological WWTP product to run efficient, cost-effective and simplified operations.
WWTP is closely related to the standards and/or expectations set for the effluent quality. WWTP processes are designed to achieve improvements in the quality of the wastewater. The various treatment processes may reduce:Suspended solids (physical particles that can clog rivers or channels as they settle under gravity)
Biodegradable organics (e.g. BOD) which can serve as “food” for microorganisms in the receiving body. Microorganisms combine this matter with oxygen from the water to yield the energy they need to thrive and multiply; unfortunately, this oxygen is also needed by fish and other organisms in the river. Heavy organic pollution can lead to “dead zones” where no fish can be found; sudden releases of heavy organic loads can lead to dramatic “fishkills”.
Pathogenic bacteria and other disease causing organisms These are most relevant where the receiving water is used for drinking, or where people would otherwise be in close contact with it; and
Nutrients, including nitrates and phosphates. These nutrients can lead to high concentrations of unwanted algae, which can themselves become heavy loads of biodegradable organic load Treatment processes may also neutralize or removing industrial wastes and toxic chemicals. This type of treatment should ideally take place at the industrial plant itself, before discharge of their effluent in municipal sewers or water courses.
Widely used terminology refers to three levels of wastewater treatment : primary, secondary, and tertiary (or advanced).
Secondary (biological) removes the dissolved organic matter that escapes primary treatment. This is achieved by microbes consuming the organic matter as food, and converting it to carbon dioxide, water, and energy for their own growth and reproduction. The biological process is then followed by additional settling tanks (“secondary sedimentation”, see photo) to remove more of the suspended solids. About 85% of the suspended solids and BOD can be removed by a well running plant with secondary treatment. Secondary WWTP technologies include the basic activated sludge process, the variants of pond and constructed wetland systems, trickling filters and other forms of WWTP which use biological activity to break down organic matter.