A water treatment plant is where water is dealt with to make it worthy for the assigned end-client. Different procedures associated with this activity, such offices incorporate sedimentation, filtration, chlorination, purification, coagulation et cetera. Water sanitization supplies utilized at these plants are water channels, ozone generator, oil water separators, screening types of gear, slop treatment hardware and some more. Read More
PT TIRTA WAHANA ABADI, as the best company that provides you solutions for various water treatment, be it clean water or wastewater
We are committed to ensuring safe, dependable, and affordable drinking water, supported by decades of hands-on experience at hundreds of water treatment facilities around the world. We pay particular attention to capital and operating cost-effectiveness and environmental impact. Depending on its end use, water from wells, rivers, lakes, and other sources requires a variety of purification processes, which can include the following:
However, the process of is not always the same in every region that depends on the use of existing technology and water treatment contractor indonesiarequires several different processes even though the basis is the same.
Coagulation or freezing which is a freezing process by which aluminum liquid sulfate and polymer are added to wastewater. Then from the mixture some small particles of wastewater will stick together and thicken. Furthermore, the collection of particles in wastewater is changing into more and more and the particles are called floc, which is then easier to move quickly because of the filtering and settling.
Sedimentation is a process in which water in the presence of floc particles is in accordance with a good process and moves to the sedimentation (sedimentation) process in ponds and storage areas. Where the water movement is slower because the floc particles are heavy enough to be deposited down. Flocks collected at the bottom of the container or reservoir are called sediments and there is a pipe which will be used for the channel where the sediment will be dried. Like when on a lake that is on the seafront. This filtering process occurs directly but the deposition stage is not included and only the floc is removed by filtration.
Filtration or filtering which is the flow of water in a filter arranged to move the particles in the water. This filtering is made to coat when filtering salt, gravel, crushed coal and several others. This filtration process is a step to collect the remaining dirt in the water and improve the quality of the disinfection process. In this screening is referred to as a routine cleaning process or what is referred to as re-cleaning.
Which disinfection before the process is carried out, the distribution system must be prepared in advance to ensure the cause caused by bacteria, viruses and parasites in a state that has died. This is because the use of chlorine which is very effective for eradicating drugs and can improve the quality of power that can maintain and protect water from contamination, especially when the system is in progress.
Sediment drying in the form of impurities is a process in which the elements that are collected and all substances that have been removed from the water in the process of sedimentation and filtration are moved to be dried in a lake or on the seashore.
Fluoridation is the process of applying fluorine to freshwater which is intended to adjust the concentration free of fluoride ions to the optimal level and sufficient to be transferred to the available channels. The process and management of this water is intended to provide conditions of water in accordance with NSW or freshwater with fluorine standards in accordance with its limits since 1957.
PH correction is a process in which lime will be more difficult to filter to control cation concentrations and stabilize natural water so as to minimize corrosion at intervals of the distribution system and in customer pipelines.
Biological waste water treatment product contains specially selected strains of beneficial microorganisms in the form of a powerful and high quality. Traditionally, biological waste water treatment products have been used to reduce wastewater COD (chemical oxygen demand) and eliminate certain pollutants such as phenols, hydrocarbons, and ammonia from wastewater.
However, they also can improve system efficiency by shortening the start-up time for new plants and by reducing operation under harsh environmental conditions such as cold temperatures. Furthermore, odor control negative impacts of wastewater treatment odors.